Flatwork Ironer Ironing Speed
Flatwork Ironer Ironing speed
First, keep the ironing machine clean and clean: to ensure that the ironing machine hot bath clean silver metallic luster. Any other color may be dirty clean grass, to bring the hidden trouble.
Second, waxing: most operators to ironing machine waxing is often not too much is the amount of insufficient. Experts say, often waxing, but enough is enough. Under normal circumstances, every 2-3 hours to wax once. If the wax is cool and soft, put the wax powder sprinkled; if the wax is hard, do not add wax powder.
Third, the neutral pH: keep the pH between 6-7. A low pH will cause the grass to rub a single roll and issue a "scream" sound.
Fourth, Flatwork Ironer observe the ironing speed and feed speed: ironing speed and feeding the end of the type of grass is closely related. For example, small pieces of cloth, such as mouth cloth, can be at a speed of 30 feet per minute (about 9 m / min), but this can not be said that the same speed is also used.
Fifth, cloth grass moisture and hot tank temperature: ironing machine hot bath temperature lower, which means to be flattened in the grass water must also be less. If the hot bed temperature is only 270ºF (132ºC) or even lower, the linen is easy to card. The higher the temperature of the hot tank, the brushed grass can be more wet.
Sixth, Flatwork Ironer the roller size: to regularly measure the circumference of the roller. When the circumference of the roller is lower than the minimum of the equipment manufacturer, this means that the production capacity of the ironing machine is basically reduced by 50%.
Third, the monitoring ironing machine linear speed: For all ironing machine, it is necessary to increase the linear speed of ironing machine (when the cloth through the ironing machine, the speed of the next roll is always faster than the previous roll ). Most of the old ironing machines have the same speed of all the rollers, so increasing the speed of the follower rollers is often achieved by increasing the thickness of the hot felt. The linear speed is critical when ironing the polyester linen. If the grass appears rubbing a single, then you should check the thickness of the hot carpet or roll speed.