Flatwork Ironer Steam Heating

Flatwork Ironer Steam heating

Under normal circumstances, when the ironing machine appears rough rough cloth grass, there are artificial and non-human, that is, their own mechanical properties and practical use of the operation of the existing problems, we are here to introduce the next.

For the first point, its own mechanical performance this piece. Ironing machine at the time of the factory, are strictly tested, so the original structure of the machine and there will be no problem. For the use of a long time ironing machine, there will be transmission parts of the accuracy will not directly lead to direct problems of hot cloth. For the traditional roll (roll) type ironing machine, if the number of drums less, then you need to iron several times, in order to achieve better ironing effect. In this case, it is recommended that you replace the appropriate product.

The second point, the actual use of this operation. As the ironing machine is divided into electric heating, steam heating, gas heating and other types, so the actual use of the problems are different. Under normal circumstances, for electric heating ironing machine, the warm-up is not enough, the voltage instability may cause the problem of rough rough cloth grass. Steam and gas heating may be due to the steam pressure is not enough and ironing speed caused by improper. When this kind of problem occurs, the effective solution is to debug the most suitable working environment parameters according to different linen.

With the improvement of people's living standards, washing clothes to enhance the same time, washing clothes after the formation is also very important, and this time ironing machine to achieve its role. Because ironing machine is a washing machine, belonging to the laundry ironing equipment. Its main components are generally single, two rollers (modern ironing machine may contain three rollers), the roller through the hand or electric rotation, to a certain temperature, when the wet clothing through the two rollers, you can remove a large number of Of the water, and to achieve the effect of ironing. For the sheets, tablecloths, cloth and so on the rolling process. The washing machine is mainly used in the hotel, hospitals, factories and other personnel flow larger places, the usual large laundry is also a demand, then we will share the use of ironing machine tips.

First, keep the ironing machine clean and clean: to ensure that the ironing machine hot iron clean silver metallic luster. Any other color may be dirty clean grass, to bring the hidden trouble.

Second, waxing: most operators to ironing machine waxing is often not too much is the amount of insufficient. Experts say, often waxing, but enough is enough. Under normal circumstances, every 2-3 hours to wax once. If the wax is cool and soft, put the wax powder sprinkled; if the wax is hard, do not add wax powder.

Third, the neutral pH: keep the pH between 6-7. A low pH will cause the grass to rub a single roll and issue a "scream" sound.

Fourth, observe the ironing speed and feed speed: ironing speed and feeding the end of the type of linen is closely related. For example, small pieces of cloth, such as mouth cloth, can be at a speed of 30 feet per minute (about 9 m / min), but this can not be said that the same speed is also used.

Fifth, linen water and hot tank temperature: ironing machine hot tank temperature is lower, which means to be flattened the amount of water in the grass must also be less. If the hot bed temperature is only 270ºF (132ºC) or even lower, the grass is easy to card. The higher the temperature of the hot tank, the brushed grass can be more wet.

Sixth, the roller size: to regularly measure the circumference of the roller. When the circumference of the roller is lower than the minimum of the equipment manufacturer, this means that the production capacity of the ironing machine is basically reduced by 50%.