Tumble Dryer Do Not Overload The Load

Tumble Dryer Do not overload the load

With the development of the national economy, the tertiary industry has gradually become a pillar industry of the country, but in the current China, industrial construction still occupies a particularly important position. In recent years, the development of industrial washing equipment is also obvious for everyone to see. Here, for everyone to talk about the use of drum dryer Note:

1, different water absorption of different fabrics to separate dehydration.

2, the new installation of the drum dryer or the new wire, you must ensure that the motor rotation direction is correct.

3, due to serious uneven fabric placed uneven vibration, should immediately turn off the power switch, re-placed the fabric even after dehydration.

4, the amount of fabric placed do not overload. In fact, in our lives is rarely used to this machine, this machine has a very good benefit, that is, it has the principle is very obvious, and large drum dryer can be a lot of Of the large factories to use, can give us a lot of convenience, but also to a large extent, save the labor force.

The large drum dryer has a structure, for this dehydration of the machine is also a large roller, there are many holes in the drum, these holes can let you in the use of the time will be inside Water out of the clear, is a very good effect, of course, this structure is also a relatively simple structure. Large roller dryer daily maintenance

In order to have a longer service life for large drum dryers, it is important to maintain the maintenance of large drum dryers on a regular basis. Experience has taught me better maintenance of drum dryers:

1, if the time is sufficient, you can choose the year, month, day maintenance measures:

2, the daily maintenance is also a trick to maintain the method, each time the use of large drum dryer after the way on the drum dryer for maintenance, in the use of drum dryer should be immediately after the water completely drained And use a dry cloth to wipe it clean, to prevent the internal rust.

3, a month also a small maintenance, the large drum dryer inside and outside the gray, dust stains clean, and the air machine to start the machine, check whether the fuselage abnormal sound, abnormal sound and other non-normal start Sound appears, and the bearing injection of lubricating oil, so that the bearing to extend the service life!

4, a large roller dryer every year for a large-scale maintenance is essential to thoroughly clean up the washing machine cold coil, hot coil and other parts of the debris and cilia, so as not to machine corrosion, cleaning solvent pump To prevent the material inside the pump caused by blockage, the length of cleaning solvent tank, so that life extension.