Tumble Dryer Precautions

Tumble Dryer Precautions

Automatic laptops are now installed in place and precautions

  For a lot of power washing machine customers friends, automatic after the purchase of the site after the installation of a very headache, how to install to play the best effect of the elbow? As a manufacturer, force net washing machine to give you the following two suggestions.

  1, the basic position to determine the equipment must be installed, the back and sides of the wall or obstacles from the distance of 800 mm or so, the rear side of the foot at the total drainage to ensure that the discharge of waste water.

2, if the use of more than two of the same type of equipment arranged side by side, the relative spacing between the equipment must be more than 600 mm, if the laundry room has enough space, the interval of more than 800 mm better for machine maintenance And maintenance.

Before the installation and installation, the force of the washing machine also recommended that you long-distance transport of the elbow equipment for basic inspection, so as to avoid unnecessary damage, affecting the use of the next. Force clean washing machinery commitment to do the pre-shipment inspection and equipment protection work to ensure the safe delivery of equipment, welcomed the cooperation. Industrial laundry equipment is the use of AC induction motor, in household appliances, its structure is more complex, you can also wash clothes can be dried. Drying is relatively simple, as long as the washed clothes on the dehydration basket, so that it quickly rotates, by centrifugal action to throw out the water, as the rain when the rain umbrella, the rain will be thrown out the same.

    When the dehydration basket cover is opened, the safety switch cuts off the circuit and the dehydration basket stops rotating; this is the timer switch closed and the washing device is ready to start. After the cover is covered, the safety switch is closed, the power is turned on, and the dryer starts to work.

    The laundry to be washed into the storage tube, driven by the motor rotation, there is a modified industrial laundry equipment, storage tank does not turn, the motor drive installed in the bottom of the storage tube rotation, From the leaves, so that water and clothing together to roll. In the control panel, there are timer switch, control the length of time for industrial laundry equipment, strong, medium and weak wash switch, but also forward rotation.

    When the switch is turned to the weak wash position, the field coil is connected in series with a reactor, which acts as a ballast. The impedance of the alternating current, so that the current becomes smaller, plus the voltage on the motor to reduce the slow speed. Switch to strong wash, the reactor does not work, the current recovery becomes larger, faster speed. In addition, some industrial laundry equipment, such as washing equipment, also installed a buzzer, when the motor stops, it can report the owner.